Modem compaq v6210br

[Flaviodbz]

ModemData.txt

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=x86_64, 
Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007
scanModem update of:  2007-20-07


There are no blacklisted modem drivers in /etc/modprobe*  files

The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.

Summary card and chipset information is in:
/proc/asound/cards:
0 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xb0000000 irq 9

/proc/asound/pcm:
00-01: Conexant Digital : Conexant Digital : playback 1
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1

A copy of /proc/asound had been copied to Modem/ALSAflavio.tgz
PCI slot 00:10.1 has a High Definition Audio Card

If this High Definition Audio card hosts a Conexant softmodem,
modem support may not yet be implemented by http://www.linuxant.com

USB modem not detected by lsusb

For candidate card, firmware information and bootup diagnostics are:

PCI slot   PCI ID      SubsystemID   Name
----------   ---------   ---------   --------------
00:10.1   10de:026c   103c:30b7   Audio device: nVidia Corporation MCP51 High Definition Audio

Modem interrupt assignment and sharing:
  9:      91753    XT-PIC-XT        acpi, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:10.1 ----
[   30.516689] ACPI: PCI Interrupt 0000:00:10.1 -> Link [LAZA] -> GSI 9 (level, low) -> IRQ 9
[   30.516864] PCI: Setting latency timer of device 0000:00:10.1 to 64

=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===

  The High Defintion Audio card with PCI ID 10de:026c may host a soft modem chip.

There is candidate modem software.

For candidate modem in PCI bus:  00:10.1
   Class 0403: 10de:026c Audio device: nVidia Corporation MCP51 High Definition Audio
      Primary PCI_id  10de:026c
    Subsystem PCI_id  103c:30b7
    Softmodem codec or chipset from diagnostics:
                               from    Archives: 14f12bfa_Conexant
                       

Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset:   hsfmodem


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt

The hsfmodem package serves a great variety of Conexant chipset modems.
From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_VersionSpec_k2.6.22_14_generic_ubuntu_i386.deb.zip
                           with 2.6.22_14_generic equivalent to 2.6.22-14-generic, your kernel version.
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See Testing.txt  for details.

Read Conexant.txt

Writing Conexant.txt


Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3



Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default.



If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rwsr-xr-- 1 root dip 313600 2007-10-04 17:48 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 ppp0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[alarcon]

Se você usa o Ubuntu 7.10 32bits siga o já falado aqui:

http://ubuntuforum-br.org/index.php/topic,21612.msg160870.html#msg160870

Bem, vi que sua arquitetura é 64bits (CPU=x86_64) e infelizmente ou você instala o ubuntu 32bits ou terá de comprar uma licença do dirver conexant para 64bits no site deles (http://www.linuxant.com/).

Este driver fornecido pela DELL  é apenas para 32bits e segundo alguns usuráios funciona na velocidade total sem ter de adquirir licença.

[Flaviodbz]

Se você usa o Ubuntu 7.10 32bits siga o já falado aqui:

http://ubuntuforum-br.org/index.php/topic,21612.msg160870.html#msg160870

Bem, vi que sua arquitetura é 64bits (CPU=x86_64) e infelizmente ou você instala o ubuntu 32bits ou terá de comprar uma licença do dirver conexant para 64bits no site deles (http://www.linuxant.com/).

Este driver fornecido pela DELL  é apenas para 32bits e segundo alguns usuráios funciona na velocidade total sem ter de adquirir licença.

so uma duvida como vc fez pra saber se meu modem e conexant ou smartlink
a claro vlw pela ajuda vou dar uma olhada no mandriva se tem algum pacote rpm para ta instalando o modem ai eu vou tentar converte qualquer coisa eu post aki