Áudio Off-board

[André Maraci]

Código Selecionar Expandir

ecurity module.
[   27.110257] ACPI: Fan [FAN] (on)
[   27.117061] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   27.117076] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   27.117091] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   27.118366] ACPI: Thermal Zone [THRM] (22 C)
[   27.915312] usbcore: registered new interface driver usbfs
[   27.915348] usbcore: registered new interface driver hub
[   27.915389] usbcore: registered new device driver usb
[   27.916510] USB Universal Host Controller Interface driver v3.0
[   27.916589] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[   27.916604] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   27.916609] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   27.916781] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   27.916816] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00
[   27.916980] usb usb1: configuration #1 chosen from 1 choice
[   27.917016] hub 1-0:1.0: USB hub found
[   27.917026] hub 1-0:1.0: 2 ports detected
[   28.017927] SCSI subsystem initialized
[   28.024687] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[   28.024701] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   28.024706] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   28.024742] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   28.024772] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b000
[   28.024897] usb usb2: configuration #1 chosen from 1 choice
[   28.024934] hub 2-0:1.0: USB hub found
[   28.024944] hub 2-0:1.0: 2 ports detected
[   28.025097] libata version 2.21 loaded.
[   28.127645] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[   28.127650] e100: Copyright(c) 1999-2006 Intel Corporation
[   28.128375] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   28.128390] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   28.128395] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   28.128428] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   28.128460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[   28.128590] usb usb3: configuration #1 chosen from 1 choice
[   28.128628] hub 3-0:1.0: USB hub found
[   28.128638] hub 3-0:1.0: 2 ports detected
[   28.232336] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[   28.232351] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   28.232356] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   28.232389] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   28.232416] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[   28.232547] usb usb4: configuration #1 chosen from 1 choice
[   28.232586] hub 4-0:1.0: USB hub found
[   28.232596] hub 4-0:1.0: 2 ports detected
[   28.336963] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[   28.336983] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   28.336988] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   28.337041] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   28.337086] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   28.337100] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfb100000
[   28.340982] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   28.341102] usb usb5: configuration #1 chosen from 1 choice
[   28.341139] hub 5-0:1.0: USB hub found
[   28.341149] hub 5-0:1.0: 8 ports detected
[   28.446838] ata_piix 0000:00:1f.1: version 2.11
[   28.446861] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   28.446907] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   28.447016] scsi0 : ata_piix
[   28.447085] scsi1 : ata_piix
[   28.447224] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[   28.447229] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[   28.608297] ata1.00: Host Protected Area detected:
[   28.608300]  current size: 312579695 sectors
[   28.608302]  native size: 312581808 sectors
[   28.608513] ata1.00: native size increased to 312581808 sectors
[   28.608517] ata1.00: ATA-7: SAMSUNG SP1644N, BV900-43, max UDMA/133
[   28.608520] ata1.00: 312581808 sectors, multi 16: LBA48
[   28.608527] ata1.00: limited to UDMA/33 due to 40-wire cable
[   28.648287] ata1.00: configured for UDMA/33
[   28.967998] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL01, max UDMA/66
[   28.975790] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   29.137950] usb 3-1: configuration #1 chosen from 1 choice
[   29.139956] ata2.00: configured for UDMA/66
[   29.143449] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP1644N  BV90 PQ: 0 ANSI: 5
[   29.147315] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H12N  UL01 PQ: 0 ANSI: 5
[   29.147418] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[   29.147439] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[   29.147482] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   29.147547] scsi2 : ata_piix
[   29.147614] scsi3 : ata_piix
[   29.147760] ata3: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001c402 bmdma 0x0001d000 irq 18
[   29.147765] ata4: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001cc02 bmdma 0x0001d008 irq 18
[   29.477944] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[   29.497715] e100: eth0: e100_probe: addr 0xfb018000, irq 20, MAC addr 00:0F:EA:DE:60:E6
[   29.515594] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   29.516226] sd 0:0:0:0: [sda] Write Protect is off
[   29.516231] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.516271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.516359] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   29.516374] sd 0:0:0:0: [sda] Write Protect is off
[   29.516377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.516398] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.516405]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[   29.572075] sd 0:0:0:0: [sda] Attached SCSI disk
[   29.578628] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   29.578879] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   29.618854] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   29.618861] Uniform CD-ROM driver Revision: 3.20
[   29.619202] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   29.993201] Attempting manual resume
[   29.993207] swsusp: Resume From Partition 8:8
[   29.993209] PM: Checking swsusp image.
[   29.993551] PM: Resume from disk failed.
[   30.032740] kjournald starting.  Commit interval 5 seconds
[   30.032758] EXT3-fs: mounted filesystem with ordered data mode.
[   36.668329] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   37.549487] NET: Registered protocol family 10
[   37.549598] lo: Disabled Privacy Extensions
[   38.576591] Linux agpgart interface v0.102 (c) Dave Jones
[   38.593400] agpgart: Detected an Intel 865 Chipset.
[   38.600528] agpgart: AGP aperture is 128M @ 0xf0000000
[   38.660900] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   38.731061] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   38.802137] intel_rng: FWH not detected
[   39.318145] iTCO_vendor_support: vendor-support=0
[   39.319940] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   39.320054] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
[   39.320116] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   39.533121] Linux video capture interface: v2.00
[   39.561742] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. SONIX JPEG (sn9c1xx)
[   39.563565] usbcore: registered new interface driver gspca
[   39.563572] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[   39.688906] nvidia: module license 'NVIDIA' taints kernel.
[   40.152705] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   40.152990] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   40.286310] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
[   40.286386] usbcore: registered new interface driver sn9c102
[   40.438807] input: PC Speaker as /class/input/input2
[   40.463189] parport_pc 00:08: reported by Plug and Play ACPI
[   40.463234] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   40.929670] usbcore: registered new interface driver snd-usb-audio
[   41.050464] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 21
[   41.082588] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[   41.957968] ACPI: PCI interrupt for device 0000:02:02.0 disabled
[   41.957983] Yamaha DS-1 PCI: probe of 0000:02:02.0 failed with error -16
[   42.364961] lp0: using parport0 (interrupt-driven).
[   42.435420] Adding 9679120k swap on /dev/sda8.  Priority:-1 extents:1 across:9679120k
[   42.911033] EXT3 FS on sda1, internal journal
[   43.797714] kjournald starting.  Commit interval 5 seconds
[   43.797978] EXT3 FS on sda7, internal journal
[   43.797984] EXT3-fs: mounted filesystem with ordered data mode.
[   44.830510] PPP generic driver version 2.4.2
[   44.863449] NET: Registered protocol family 17
[   45.072600] NET: Registered protocol family 24
[   45.370080] No dock devices found.
[   45.472267] input: Power Button (FF) as /class/input/input4
[   45.478023] ACPI: Power Button (FF) [PWRF]
[   45.521464] input: Power Button (CM) as /class/input/input5
[   45.527124] ACPI: Power Button (CM) [PWRB]
[   45.938248] ip_tables: (C) 2000-2006 Netfilter Core Team
[   47.345642] ppdev: user-space parallel port driver
[   47.771301] audit(1200762870.360:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4753 profile="/usr/sbin/cupsd"
[   47.895007] eth0: no IPv6 routers present
[   47.957628] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   47.957635] apm: overridden by ACPI.
[   48.266888] Failure registering capabilities with primary security module.
[   48.468449] Bluetooth: Core ver 2.11
[   48.468599] NET: Registered protocol family 31
[   48.468604] Bluetooth: HCI device and connection manager initialized
[   48.468608] Bluetooth: HCI socket layer initialized
[   48.491631] Bluetooth: L2CAP ver 2.8
[   48.491637] Bluetooth: L2CAP socket layer initialized
[   48.578484] Bluetooth: RFCOMM socket layer initialized
[   48.578612] Bluetooth: RFCOMM TTY layer initialized
[   48.578616] Bluetooth: RFCOMM ver 1.8
[   50.510109] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   50.510131] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   50.510162] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
root@andremaraci-desktop:/home/andremaraci# wget ftp://ftp.alsa-project.org/pub/firmware/alsa-firmware-1.0.15.tar.bz2
--10:08:19--  ftp://ftp.alsa-project.org/pub/firmware/alsa-firmware-1.0.15.tar.bz2
           => `alsa-firmware-1.0.15.tar.bz2'
Resolvendo ftp.alsa-project.org... 160.217.9.25
Conectando a ftp.alsa-project.org|160.217.9.25|:21... conectado.
Logando como anonymous ... Logado!
==> SYST ... pronto.    ==> PWD ... pronto.
==> TYPE I ... feito.  ==> CWD /pub/firmware ... pronto.
==> PASV ... pronto.    ==> RETR alsa-firmware-1.0.15.tar.bz2 ... pronto.
Tamanho: 3,254,784 (3.1M) (sem autoridade)

100%[==================>] 3,254,784     26.14K/s    ETA 00:00

10:10:28 (27.72 KB/s) - `alsa-firmware-1.0.15.tar.bz2' salvo [3254784]

[André Maraci]

Código Selecionar Expandir

root@andremaraci-desktop:/home/andremaraci# tar -xjvf alsa-firmware-1.0.15.tar.bz2
alsa-firmware-1.0.15/
alsa-firmware-1.0.15/multisound/
alsa-firmware-1.0.15/multisound/Makefile.in
alsa-firmware-1.0.15/multisound/Makefile.am
alsa-firmware-1.0.15/depcomp
alsa-firmware-1.0.15/ltconfig
alsa-firmware-1.0.15/ltmain.sh
alsa-firmware-1.0.15/configure.in
alsa-firmware-1.0.15/emi_26_62/
alsa-firmware-1.0.15/emi_26_62/emi26-firmware.bin
alsa-firmware-1.0.15/emi_26_62/emi26-loader.bin
alsa-firmware-1.0.15/emi_26_62/emi62-firmware-midi.bin
alsa-firmware-1.0.15/emi_26_62/emi62-firmware-spdif.bin
alsa-firmware-1.0.15/emi_26_62/emi62-loader.bin
alsa-firmware-1.0.15/emi_26_62/Makefile.in
alsa-firmware-1.0.15/emi_26_62/license.txt
alsa-firmware-1.0.15/emi_26_62/emi26-bitstream.bin
alsa-firmware-1.0.15/emi_26_62/Makefile.am
alsa-firmware-1.0.15/emi_26_62/emi62-bitstream.bin
alsa-firmware-1.0.15/pcxhrloader/
alsa-firmware-1.0.15/pcxhrloader/pcxhr.conf
alsa-firmware-1.0.15/pcxhrloader/Makefile.in
alsa-firmware-1.0.15/pcxhrloader/e321_512.e56
alsa-firmware-1.0.15/pcxhrloader/xc_1_882.dat
alsa-firmware-1.0.15/pcxhrloader/xi_1_882.dat
alsa-firmware-1.0.15/pcxhrloader/README
alsa-firmware-1.0.15/pcxhrloader/d321_512.d56
alsa-firmware-1.0.15/pcxhrloader/Makefile.am
alsa-firmware-1.0.15/pcxhrloader/b321_512.b56
alsa-firmware-1.0.15/wavefront/
alsa-firmware-1.0.15/wavefront/Makefile.in
alsa-firmware-1.0.15/wavefront/yss225.c
alsa-firmware-1.0.15/wavefront/Makefile.am
alsa-firmware-1.0.15/wavefront/fw_writer.c
alsa-firmware-1.0.15/ymfpci/
alsa-firmware-1.0.15/ymfpci/Makefile.in
alsa-firmware-1.0.15/ymfpci/Makefile.am
alsa-firmware-1.0.15/ymfpci/fw_writer.c
alsa-firmware-1.0.15/ymfpci/hwmcode.c
alsa-firmware-1.0.15/asihpi/
alsa-firmware-1.0.15/asihpi/dsp4100.txt
alsa-firmware-1.0.15/asihpi/dsp2400.txt
alsa-firmware-1.0.15/asihpi/dsp6205.bin
alsa-firmware-1.0.15/asihpi/dsp4100.bin
alsa-firmware-1.0.15/asihpi/dsp6205.txt
alsa-firmware-1.0.15/asihpi/Makefile.in
alsa-firmware-1.0.15/asihpi/dsp6200.txt
alsa-firmware-1.0.15/asihpi/dsp6413.txt
alsa-firmware-1.0.15/asihpi/dsp5000.bin
alsa-firmware-1.0.15/asihpi/dsp8900.bin
alsa-firmware-1.0.15/asihpi/dsp6200.bin
alsa-firmware-1.0.15/asihpi/dsp8713.txt
alsa-firmware-1.0.15/asihpi/dsp6600.txt
alsa-firmware-1.0.15/asihpi/dsp6600.bin
alsa-firmware-1.0.15/asihpi/dsp6413.bin
alsa-firmware-1.0.15/asihpi/dsp5000.txt
alsa-firmware-1.0.15/asihpi/Makefile.am
alsa-firmware-1.0.15/asihpi/dsp4300.txt
alsa-firmware-1.0.15/asihpi/dsp8713.bin
alsa-firmware-1.0.15/asihpi/dsp4300.bin
alsa-firmware-1.0.15/asihpi/dsp8900.txt
alsa-firmware-1.0.15/asihpi/dsp2400.bin
alsa-firmware-1.0.15/emu/
alsa-firmware-1.0.15/emu/emu1010b_netlist.h
alsa-firmware-1.0.15/emu/Makefile.in
alsa-firmware-1.0.15/emu/hana_netlist.h
alsa-firmware-1.0.15/emu/emu1010_notebook_netlist.h
alsa-firmware-1.0.15/emu/Makefile.am
alsa-firmware-1.0.15/emu/emu0404_netlist.h
alsa-firmware-1.0.15/emu/fw_writer.c
alsa-firmware-1.0.15/emu/micro_dock_netlist.h
alsa-firmware-1.0.15/emu/audio_dock_netlist.h
alsa-firmware-1.0.15/configure
alsa-firmware-1.0.15/Makefile.in
alsa-firmware-1.0.15/maestro3/
alsa-firmware-1.0.15/maestro3/Makefile.in
alsa-firmware-1.0.15/maestro3/maestro3.h
alsa-firmware-1.0.15/maestro3/Makefile.am
alsa-firmware-1.0.15/maestro3/fw_writer.c
alsa-firmware-1.0.15/hdsploader/
alsa-firmware-1.0.15/hdsploader/digiface_firmware_rev11.dat
alsa-firmware-1.0.15/hdsploader/Makefile.in
alsa-firmware-1.0.15/hdsploader/tobin.c
alsa-firmware-1.0.15/hdsploader/digiface_firmware.dat
alsa-firmware-1.0.15/hdsploader/README
alsa-firmware-1.0.15/hdsploader/Makefile.am
alsa-firmware-1.0.15/hdsploader/multiface_firmware_rev11.dat
alsa-firmware-1.0.15/hdsploader/multiface_firmware.dat
alsa-firmware-1.0.15/mixartloader/
alsa-firmware-1.0.15/mixartloader/miXart8.xlx
alsa-firmware-1.0.15/mixartloader/miXart8AES.xlx
alsa-firmware-1.0.15/mixartloader/Makefile.in
alsa-firmware-1.0.15/mixartloader/README
alsa-firmware-1.0.15/mixartloader/miXart.conf
alsa-firmware-1.0.15/mixartloader/Makefile.am
alsa-firmware-1.0.15/mixartloader/miXart8.elf
alsa-firmware-1.0.15/vxloader/
alsa-firmware-1.0.15/vxloader/x1_1_vx2.rbt
alsa-firmware-1.0.15/vxloader/bd563v2.boot
alsa-firmware-1.0.15/vxloader/bx_1_vxp.b56
alsa-firmware-1.0.15/vxloader/vxpocket.conf
alsa-firmware-1.0.15/vxloader/l_1_vp4.d56
alsa-firmware-1.0.15/vxloader/Makefile.in
alsa-firmware-1.0.15/vxloader/x1_1_vp4.rbt
alsa-firmware-1.0.15/vxloader/l_1_vxp.d56
alsa-firmware-1.0.15/vxloader/bd56002.boot
alsa-firmware-1.0.15/vxloader/vx222.conf
alsa-firmware-1.0.15/vxloader/toxlx.c
alsa-firmware-1.0.15/vxloader/l_1_v22.d56
alsa-firmware-1.0.15/vxloader/README
alsa-firmware-1.0.15/vxloader/vxboard.conf
alsa-firmware-1.0.15/vxloader/Makefile.am
alsa-firmware-1.0.15/vxloader/bx_1_vp4.b56
alsa-firmware-1.0.15/vxloader/vxp440.conf
alsa-firmware-1.0.15/vxloader/x1_1_vxp.rbt
alsa-firmware-1.0.15/vxloader/bd563s3.boot
alsa-firmware-1.0.15/vxloader/l_1_vx2.d56
alsa-firmware-1.0.15/vxloader/x1_2_v22.rbt
alsa-firmware-1.0.15/usx2yloader/
alsa-firmware-1.0.15/usx2yloader/us224.rbt
alsa-firmware-1.0.15/usx2yloader/tascam_loader.asm
alsa-firmware-1.0.15/usx2yloader/us122.rbt
alsa-firmware-1.0.15/usx2yloader/Makefile.in
alsa-firmware-1.0.15/usx2yloader/us428.prepad
alsa-firmware-1.0.15/usx2yloader/an2131.asm
alsa-firmware-1.0.15/usx2yloader/us428.conf
alsa-firmware-1.0.15/usx2yloader/tascam_loader.ihx
alsa-firmware-1.0.15/usx2yloader/README
alsa-firmware-1.0.15/usx2yloader/us122fw.ihx
alsa-firmware-1.0.15/usx2yloader/us224.prepad
alsa-firmware-1.0.15/usx2yloader/us428fw.ihx
alsa-firmware-1.0.15/usx2yloader/us122.prepad
alsa-firmware-1.0.15/usx2yloader/Makefile.am
alsa-firmware-1.0.15/usx2yloader/us224.conf
alsa-firmware-1.0.15/usx2yloader/us122.conf
alsa-firmware-1.0.15/usx2yloader/us224fw.ihx
alsa-firmware-1.0.15/usx2yloader/us428.rbt
alsa-firmware-1.0.15/config.guess
alsa-firmware-1.0.15/README
alsa-firmware-1.0.15/Makefile.am
alsa-firmware-1.0.15/aclocal.m4
alsa-firmware-1.0.15/COPYING
alsa-firmware-1.0.15/korg1212/
alsa-firmware-1.0.15/korg1212/Makefile.in
alsa-firmware-1.0.15/korg1212/k1212.dsp
alsa-firmware-1.0.15/korg1212/Makefile.am
alsa-firmware-1.0.15/sb16/
alsa-firmware-1.0.15/sb16/sb16_csp_codecs.h
alsa-firmware-1.0.15/sb16/Makefile.in
alsa-firmware-1.0.15/sb16/Makefile.am
alsa-firmware-1.0.15/sb16/fw_writer.c
alsa-firmware-1.0.15/missing
alsa-firmware-1.0.15/install-sh
alsa-firmware-1.0.15/config.sub
alsa-firmware-1.0.15/aica/
alsa-firmware-1.0.15/aica/aica_firmware.bin
alsa-firmware-1.0.15/aica/Makefile.in
alsa-firmware-1.0.15/aica/Dreamcast_sound.txt
alsa-firmware-1.0.15/aica/license.txt
alsa-firmware-1.0.15/aica/Makefile.am
alsa-firmware-1.0.15/echoaudio/
alsa-firmware-1.0.15/echoaudio/Makefile.in
alsa-firmware-1.0.15/echoaudio/DSP/
alsa-firmware-1.0.15/echoaudio/DSP/Echo3gDSP.c
alsa-firmware-1.0.15/echoaudio/DSP/IndigoIODSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Gina24_361DSP.c
alsa-firmware-1.0.15/echoaudio/DSP/LoaderDSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Mona361DSP.c
alsa-firmware-1.0.15/echoaudio/DSP/MiaDSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Darla24DSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Darla20DSP.c
alsa-firmware-1.0.15/echoaudio/DSP/MonaDSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Layla24DSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Layla20DSP.c
alsa-firmware-1.0.15/echoaudio/DSP/IndigoDSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Gina20DSP.c
alsa-firmware-1.0.15/echoaudio/DSP/IndigoDJDSP.c
alsa-firmware-1.0.15/echoaudio/DSP/Gina24DSP.c
alsa-firmware-1.0.15/echoaudio/ASIC/
alsa-firmware-1.0.15/echoaudio/ASIC/3G_ASIC.c
alsa-firmware-1.0.15/echoaudio/ASIC/Gina24ASIC.c
alsa-firmware-1.0.15/echoaudio/ASIC/Mona1ASIC48.c
alsa-firmware-1.0.15/echoaudio/ASIC/Layla24_2A_ASIC.c
alsa-firmware-1.0.15/echoaudio/ASIC/Mona2ASIC.c
alsa-firmware-1.0.15/echoaudio/ASIC/LaylaASIC.c
alsa-firmware-1.0.15/echoaudio/ASIC/Mona1ASIC96.c
alsa-firmware-1.0.15/echoaudio/ASIC/Layla24_2S_ASIC.c
alsa-firmware-1.0.15/echoaudio/ASIC/Gina24ASIC_361.c
alsa-firmware-1.0.15/echoaudio/ASIC/Mona1ASIC48_361.c
alsa-firmware-1.0.15/echoaudio/ASIC/Mona1ASIC96_361.c
alsa-firmware-1.0.15/echoaudio/ASIC/Layla24_1ASIC.c
alsa-firmware-1.0.15/echoaudio/Makefile.am
alsa-firmware-1.0.15/echoaudio/fw_writer.c
root@andremaraci-desktop:/home/andremaraci# cd alsa-firmware-1.0.14
bash: cd: alsa-firmware-1.0.14: Arquivo ou diretório inexistente
root@andremaraci-desktop:/home/andremaraci# cd alsa-firmware-1.0.15
root@andremaraci-desktop:/home/andremaraci/alsa-firmware-1.0.15#
root@andremaraci-desktop:/home/andremaraci/alsa-firmware-1.0.15# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
root@andremaraci-desktop:/home/andremaraci/alsa-firmware-1.0.15# cd ymfpci
root@andremaraci-desktop:/home/andremaraci/alsa-firmware-1.0.15/ymfpci# make
make: *** Nenhum alvo indicado e nenhum arquivo make encontrado.  Pare.
root@andremaraci-desktop:/home/andremaraci/alsa-firmware-1.0.15/ymfpci# /lib/firware/yamaha
bash: /lib/firware/yamaha: Arquivo ou diretório inexistente
root@andremaraci-desktop:/home/andremaraci/alsa-firmware-1.0.15/ymfpci# exit
exit
andremaraci@andremaraci-desktop:~$ /lib/firmware/yamaha
bash: /lib/firmware/yamaha: Arquivo ou diretório inexistente
andremaraci@andremaraci-desktop:~$


Amigo fiz... isso... não sei se fiz corretamente, não entendi muito o que fazer no final...?
mas no ínicio estava dando tudo ok...
Me explica ai... ver o que tenho que fazer a mais.

[Hqxriven]

sudo apt-get install build-essential

wget ftp://ftp.alsa-project.org/pub/firmware/alsa-firmware-1.0.15.tar.bz2

tar -xjvf alsa-firmware-1.0.15.tar.bz2

cd alsa-firmware-1.0.15

./configure

cd ymfpci

make

Depois tres arquivos serão criados ds1_ctrl.fw ds1_dsp.fw ds1e_ctrl.fw

E só vc copiar eles para lib/firmware/yamaha vai no terminal e digita sudo nautilus e copia os arquivos

[Glauco Hass]

Mas o Ubuntu não tem o driver pra essa placa?
O dispositivo foi reconhecido, mas não carregado, como ele mostrou no asoundconf list. Tenta aí um

Código Selecionar Expandir

sudo modprobe snd-ymfpci e veja se algum aplicativo emite som, até mesmo o aplay com um arquivo wav.

[André Maraci]

Glauco Hass
O dispositivo foi reconhecido, mas não carregado, como ele mostrou no asoundconf list. Tenta aí um
Código:

sudo modprobe snd-ymfpci

e veja se algum aplicativo emite som, até mesmo o aplay com um arquivo wav

Amigo nada... nenhum aplicativo sia som.

sudo apt-get install build-essential

wget ftp://ftp.alsa-project.org/pub/firmware/alsa-firmware-1.0.15.tar.bz2

tar -xjvf alsa-firmware-1.0.15.tar.bz2

cd alsa-firmware-1.0.15

./configure

cd ymfpci

make

Depois tres arquivos serão criados ds1_ctrl.fw ds1_dsp.fw ds1e_ctrl.fw

E só vc copiar eles para lib/firmware/yamaha vai no terminal e digita sudo nautilus e copia os arquivos
Enviada: Hoje às 10:17
Enviado por: André Maraci

Ok estou fazendo isso agora... vamos ver  no que vai dar...

[André Maraci]

Código Selecionar Expandir

ds1_ctrl.fw ds1_dsp.fw ds1e_ctrl.fw

Onde vão esta este 3 arquivos...? Entrar como nautilus eu sei.

Já sei onde ficam, mas no local Firmware no tem a pasta Yamaha?
O que faço?

[Hqxriven]

No diretório em que vc fez o make!!!

Hqx

[André Maraci]

Onde vão esta este 3 arquivos...? Entrar como nautilus eu sei.

Já sei onde ficam, mas no local Firmware no tem a pasta Yamaha?
O que faço?

[Hqxriven]

Estranho... mas já tentou criar a pasta e copiar os arquivos para lá e dar um boot!!!

[André Maraci]

Olá... amigos quero lhe informá-los que voltei para o Windows e vou ficar com ele, por mais um período, e muito obrigado pela atenção de todos.
Fiz bastante coisas e nada de resolver o problema.
Até mais, se quiserem entrar em contato comigo... me envie um e-mail: amaraci@bol.com.br
Abraço