Ajuda por favor, Ubuntu não inicia mais o X

[SSteel]

Ola pessoal.
Comecei a ter uns problemas com o Enlightenment DR16, o Gnome não iniciava por causa dele, resolvi reinstalando e consegui usar o Metacity novamente.
Agora começou a voltar ao GDM ao inves de logar e entrar no Gnomem mais um tempo com esse problema e aparece outro agora nem o X inicia mais ! Ele não aceita nenhum caracter, se pressionar qualquer tecla de letra ou numero ele fecha o GDM e abre novamente.
O log:
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(II) SAVAGE(0): 4740 kB of Videoram needed for 3D; 32768 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] DRM interface version 1.0
(II) SAVAGE(0): [drm] drmSetBusid failed (6, pci:0000:01:00.0), Permission denied
(EE) SAVAGE(0): [drm] DRIScreenInit failed.  Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Using 1280 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      32 128x128 slots
      12 256x256 slots
(==) SAVAGE(0): Backing store disabled
(**) Option "dpms"
(**) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libglcore.so
(II) Module GLcore: vendor="X.Org Foundation"
   compiled for 7.2.0, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "abnt2"
(**) Generic Keyboard: XkbModel: "abnt2"
(**) Option "XkbLayout" "br"
(**) Generic Keyboard: XkbLayout: "br"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
   No such file or directory.
Error opening /dev/input/wacom : Success
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
   No such file or directory.
Error opening /dev/input/wacom : Success
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
   No such file or directory.
Error opening /dev/input/wacom : Success
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.


Por favor me ajudem. Valeu.

[Versuri]

Logue-se e digite:

sudo dpkg-reconfigure xserver-xorg

[SSteel]

Eu estava tentando lembrar desse comando, valeu, mas não sei se vai dar certo, eu tenho um config do Xorg de backup, ja tentei repor com a que estou usando e nada.
A ultima coisa que fiz no xorg.conf foi remover a sessão DRI.

[Versuri]

Faça o comando, depois coloque aqui o resultado, continuaremos a te ajudar.

Se mesmo assim não funcionar, tente o comando sudo nano /etc/X11/xorg.conf para alterar manualmente seu xorg.conf

[zoroastro]

verifica se em "Sessão" está selecionado GNOME

[SSteel]

A mesma coisa, percebi que só meu usuario não incia o X, ou root e outro que eu criei estão normais. O GDM ainda esta com aquele problema, se apertar qualquer letra ele fecha. Quando tento startx tenta abrir o Enlightenment e volta ao modo texto.
Alguem ja viu alguma coisa assim ?

[SSteel]

Agora não inicia nem sinal de video no Monitor, as vezes aparece sinal e entro no sistema, mas é só reiniciar e para, tenho que ficar segurando obotão de reset até voltar sinal. Alguma configuração errada do X pode ter "estragado" o hardware ?