Beryl não funciona mais depois de atualizar para 7.04

[eendler]

Estava com o Beryl funcionando perfeitamente no meu note (Placa de video Intel GMA 950) com o ubuntu 6.10. Resolvi atualizar para o Feisty  e ele parou de funcionar. Quando mando o gerenciador de janelas mudar para o Beryl a tela fica completamente branca, porém o mouse ainda funciona e é possivel girar o cubo usando ctrl-alt-seta. Alguem já teve esse problema?

Obrigado.

[k7br]

Salve!
Seja bem vindo!
Talvez o /etc/X11/xorg.conf voltou ao original .
Talvez ajude: http://marcellino.wordpress.com/2007/02/06/instalando-desktop-3d-aiglx-beryl-no-ubuntu-610-passo-a-passo/
Apesar de ser do 6.10 talvez de certo
Boa sorte!

[eendler]

Pior é q não é isso... O xorg.conf ta igual ao que funcionava no 6.10. Aparentemente o driver mudou, sei lá...
De qualquer maneira vou dar uma conferida usando essa tua dica. Depois dou retorno.

Valeu!

[eendler]

O xorg.conf ta certo... Como no tutorial e como funcionava no 6.10... Tem algo errado?

Valew!

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  FontPath "/usr/share/fonts/X11/misc"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  Load "dbe"
  load "glx"
#  load "GLcore"
  load "dri"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "us"
  option "XkbOptions" "lv3:ralt_switch"
  option "XkbVariant" "intl"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "Intel Corporation Mobile Integrated Graphics Controller"
  boardname "Intel 945"
  busid "PCI:0:2:0"
  driver "i810"
  screen 0
  VideoRam  131072
  Option "ForceBIOS" "1024x768=1280x800"
  vendorname "Intel"
  Option "XAANoOffscreenPixmaps"
EndSection

Section "Monitor"
  identifier "Generic Monitor"
  vendorname "Generic"
  modelname "Flat Panel 1280x800"
  HorizSync 31.5-90
  VertRefresh 60
  modeline  "1280x800@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "Intel Corporation Mobile Integrated Graphics Controller"
  Monitor "Generic Monitor"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1280x768@60" "1600x1024@60" "800x600@60" "1680x1050@60" "1920x1200@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
  Option "AIGLX" "true"
EndSection

Section "DRI"
        Mode 0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection

[ginho]

Você atualizou o repositório do beryl para a versão 7.04?
Sudo gedit /etc/apt/sources.list
verefique o repositório do beryl, se estiver marcado como edgy, estes não estão atualizados..
Se realmente for isso de uma olhada neste link, possui os repositórios corretos:
http://wiki.beryl-project.org/wiki/Install_Beryl_on_Ubuntu