Problemas em compartilhar a impressora

[RodrigoPB]

Ae galera
Eu instalei e configurei o Samba nu Ubuntu 6.1 para compartilhar arquivos e uma impressora instalada na máquina com o Linux.  O outro computador usa o Windows XP SP2.
Os compartilhamentos estão funcionando corretamente, cada maquina acessa os arquivos uma das outras, mas o computador com Windows não está conseguindo imprimir nada na impressora instalada no Linux.
O computador do Windows até consegue ver a impressora, eu consigo insalá-la e tudo, mas quando na pasta de impressoras aparece junto ao nome dela uma frase dizendo que não foi possível se conectar à impressora.
Quando qualquer aplicação tenta imprimir algo ocorre erros.
Por favor alguém me ajude ou ficará dificil de usar o Ubuntu.
Segue abaixo meu arquivo smb.conf
Se alguém tiver algum modelo arquivo que resolva esse meu problema, por favor poste aqui.


#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = CASA

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
# in the samba-doc package for details.
   security = share

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
#  printing = CUPS
#   printcap name = CUPS

# CUPS printing.  See also the cupsaddsmb( manpage in the
# cupsys-client package.
   printing = cups
   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @lpadmin


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
;   valid users = %S

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
;   writable = no

# File creation mask is set to 0600 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0664.
;   create mask = 0600

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

wins support = no
[printers]
   comment = All Printers
   path = /tmp
   printable = yes
   public = yes
   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


[rodrigo]
path = /home/rodrigo
available = yes
browseable = yes
public = yes
writable = yes

[Windows]
path = /media/hda1
available = yes
browseable = yes
public = yes
writable = yes

[Khaoz]

Para dar um up no post e não fazer um repost.
Estou exatamente com o mesmo problema e minhas configurações são semelhantes (quase iguais as do post anterior), conforme segue:

Código Selecionar Expandir


[global]
; General server settings
netbios name = pessoal02
server string =
workgroup = trabalho
announce version = 5.0
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192

passdb backend = tdbsam
security = user
encrypt passwords = yes
username map = /etc/samba/smbusers
smb passwd file = /etc/samba/smbpasswd
name resolve order = hosts wins bcast

wins support = yes

printing = cups
printcap name = cups

syslog = 1
syslog only = yes

; NOTE: If you need access to the user home directories uncomment the
; lines below and adjust the settings to your hearts content.
;[homes]
;valid users = %S
;create mode = 0600
;directory mode = 0755
;browseable = no
;read only = no
;veto files = /*.{*}/.*/mail/bin/

; NOTE: Only needed if you run samba as a primary domain controller.
; Not needed as this config doesn't cover that matter.
;[netlogon]
;path = /var/lib/samba/netlogon
;admin users = Administrator
;valid users = %U
;read only = no

; NOTE: Again - only needed if you're running a primary domain controller.
;[Profiles]
;path = /var/lib/samba/profiles
;valid users = %U
;create mode = 0600
;directory mode = 0700
;writeable = yes
;browseable = no

; NOTE: Inside this place you may build a printer driver repository for
; Windows - I'll cover this topic in another HOWTO.
[print$]
path = /var/lib/samba/printers
browseable = yes
guest ok = yes
read only = yes
write list = root
create mask = 0664
directory mask = 0775

[printers]
comment = "All printers"
browseable = yes
path = /tmp
guest ok = yes
printable = yes
public = yes
writable = yes
read only = yes
create mode = 0700

; Uncomment if you need to share your CD-/DVD-ROM Drive
;[DVD-ROM Drive]
;path = /media/cdrom
;browseable = yes
;read only = yes
;guest ok = yes

[pub]
path = /home/pessoal02/pub
browseable = yes
writable = true
read only = no
guest ok = no
create mask = 0644
directory mask = 0755


[Khaoz]

Após inúmeras tentativas e pesquisas na internet, desisti de tentar imprimir utilizando o samba+cups e estou tentando imprimir diretamente utilizando o cups (acredito que quando o cups funcionar o samba irá funcionar), porém mesmo assim não esta indo. Segue os arquivos de configuração:

smb.conf:

Código Selecionar Expandir


[global]
netbios name = pessoal02
server string = Samba Server
workgroup = trabalho
security = user
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
log file = /var/log/samba/%m.log
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
hostname lookups = yes
hosts allow = 192.168.0.0/255.255.255.0 localhost
hosts deny = All
interfaces = lo eth0
guest ok = yes
browse list = yes
printcap name = cups
printing = cups
load printers = yes

# do not set to "yes". It's deprecated
passdb expand explicit = no

[pub]
path = /home/pessoal02/pub
comment = Pasta compartilhada
guest ok = yes
create mode = 0766
browseable = yes
public = yes
read only = no
create mode 0777

;[print$]
; comment = Printer Drivers
; path = /var/lib/samba/printers
; guest ok = yes
; browseable = yes
; read only = yes
; write list = root

;[printers]
; comment = All Printers
; browseable = no
; printable = yes
; writable = no
; public = yes
; guest ok = yes
; path = /var/spool/samba

;[OL_p02]
; path = /var/spool/samba
; comment = Olivetti DM 209L
; browseable = yes
; printable = yes
; writeable = yes
; public = yes
; guest ok = yes


cupsd.conf

Código Selecionar Expandir


# Show general information in error_log.
LogLevel info

SystemGroup lpadmin

# Allow remote access
Listen *:631
Listen /var/run/cups/cups.sock

# Share local printers on the local network.
Browsing On
BrowseOrder deny,allow
BrowseAddress 192.168.0.* localhost
BrowseAllow 192.168.0.* localhost

DefaultAuthType Basic

<Location />
  # Allow shared printing...
  Order deny,allow
  Allow localhost
  Allow 192.168.0.*
  Deny all
</Location>

<Location /admin>
  # Restrict access to the admin pages...
  Order deny,allow
  Deny all
  Allow localhost
</Location>

<Location /admin/conf>
  AuthType Basic
  AuthClass System
  Require user @SYSTEM
  # Restrict access to the configuration files...
  Order allow,deny
  Allow localhost
</Location>

<Policy default>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs CUPS-Reject-Jobs CUPS-Set-Default>
    AuthType Basic
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  # Only the owner or an administrator can cancel a job...
  <Limit Cancel-Job>
    Order deny,allow
    Require user @OWNER @SYSTEM
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>



Alguém poderia dar uma mão ai ?

[Khaoz]

Problema resolvido. Não sei se da forma mais correta mas...

Removi a impressora que eu queria compartilhar e reinstalei com o driver correto colocando um nome um pouco diferente:

OL_p02Local (eu uso uma sigla para minhas impressoras).

E não compartilhei essa

Instalei outra, exatamente igual, na mesma porta e tudo, porém utilizando o driver RAW/Queue.
Essa segunda eu compartilhei na rede e instalei na minha máquina windows utilizando o cups diretamente, sem samba:

http://ubuntulinux:631/printers/OL_p02

E é isso.