Pen USB dvb-t Trident TVMaster TM6000

Iniciado por Bluray, 07 de Abril de 2015, 16:07

tópico anterior - próximo tópico
Imprimir
Ir para o fim Páginas1
Ações

Bluray

07 de Abril de 2015, 16:07 Última edição: 07 de Abril de 2015, 16:09 por Bluray
Esta pen USB é para recepção de televisão digital e analógica , mas nenhum software a consegue  detectar  experimentei conecta-la no Ubuntu 14,04 e 14,10 , nas  duas versões do ubuntu da o mesmo erro.

Código Selecionar
[ 2196.716941] xc2028 0-0061: Could not load firmware xc3028-v24.fw

Código Selecionar
[ 2192.652052] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 2192.793338] usb 1-4: New USB device found, idVendor=6000, idProduct=0001
[ 2192.793346] usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=64
[ 2192.793352] usb 1-4: Product: TVBOX
[ 2192.793356] usb 1-4: Manufacturer: Trident
[ 2192.793361] usb 1-4: SerialNumber: 2004090820040908
[ 2192.797322] tm6000: alt 0, interface 0, class 255
[ 2192.797328] tm6000: alt 0, interface 0, class 255
[ 2192.797333] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[ 2192.797336] tm6000: alt 1, interface 0, class 255
[ 2192.797340] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[ 2192.797343] tm6000: alt 1, interface 0, class 255
[ 2192.797347] tm6000: alt 2, interface 0, class 255
[ 2192.797350] tm6000: alt 2, interface 0, class 255
[ 2192.797354] tm6000: New video device @ 480 Mbps (6000:0001, ifnum 0)
[ 2192.797357] tm6000: Found Generic tm5600 board
[ 2192.811860] tm6000 #0: i2c eeprom 00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2193.021858] tm6000 #0: i2c eeprom 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2193.232045] tm6000 #0: i2c eeprom 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2193.441983] tm6000 #0: i2c eeprom 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2193.653488] tm6000 #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2193.865106] tm6000 #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2194.074262] tm6000 #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2194.284359] tm6000 #0: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2194.494358] tm6000 #0: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2194.704612] tm6000 #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2194.914255] tm6000 #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2195.124234] tm6000 #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2195.337734] tm6000 #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2195.549482] tm6000 #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2195.758265] tm6000 #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2195.969236] tm6000 #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 2196.167611] Device has eeprom but is currently unknown
[ 2196.174729] Found tm6000
[ 2196.713982] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[ 2196.714024] xc2028 0-0061: creating new instance
[ 2196.714028] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 2196.714032] Setting firmware parameters for xc2028
[ 2196.714206] tm6000 #0: registered device video0
[ 2196.714211] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[ 2196.714509] usb 1-4: Direct firmware load failed with error -2
[ 2196.714515] usb 1-4: Falling back to user helper
[ 2196.716941] xc2028 0-0061: Could not load firmware xc3028-v24.fw.


Queria utilizar esta pen para receber televisão digital  " DVB-T " .
@CMatomic

Bluray

#2
26 de Setembro de 2015, 18:55 Última edição: 26 de Setembro de 2015, 19:02 por Bluray
lido .

Depois varias tentativas consegui activar esta pen USB  , mas só a recepção analógica

Código Selecionar
[   53.474620] ISO 9660 Extensions: RRIP_1991A
[  109.485415] xc2028 8-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[  114.848730] xc2028 8-0061: Loading firmware for type=(0), id 000000000000b700.
[  115.273296] SCODE (20000000), id 000000000000b700:
[  115.273308] xc2028 8-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[  117.793084] xc2028 8-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  123.165915] (0), id 00000000000000ff:
[  123.165924] xc2028 8-0061: Loading firmware for type=(0), id 0000000100000007.
[  123.594464] xc2028 8-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[  292.672573] usb 1-1: USB disconnect, device number 2
[  292.672690] tm6000: disconnecting tm6000 #0
[  292.672972] xc2028 8-0061: destroying instance
[  307.621112] r8169 0000:02:00.0 eth0: link up
[  307.621129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  307.723314] r8169 0000:02:00.0 eth0: link down
[  311.195083] r8169 0000:02:00.0 eth0: link up
[  538.435227] usb 1-1: new high-speed USB device number 8 using xhci_hcd
[  538.628602] usb 1-1: New USB device found, idVendor=6000, idProduct=0001
[  538.628606] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=64
[  538.628608] usb 1-1: Product: TVBOX
[  538.628610] usb 1-1: Manufacturer: Trident
[  538.628612] usb 1-1: SerialNumber: 2004090820040908
[  538.632771] tm6000: alt 0, interface 0, class 255
[  538.632774] tm6000: alt 0, interface 0, class 255
[  538.632777] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[  538.632778] tm6000: alt 1, interface 0, class 255
[  538.632779] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[  538.632781] tm6000: alt 1, interface 0, class 255
[  538.632782] tm6000: alt 2, interface 0, class 255
[  538.632783] tm6000: alt 2, interface 0, class 255
[  538.632785] tm6000: New video device @ 480 Mbps (6000:0001, ifnum 0)
[  538.632786] tm6000: Found Generic tm5600 board
[  538.647222] tm6000 #0: i2c eeprom 00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  538.857066] tm6000 #0: i2c eeprom 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  539.068317] tm6000 #0: i2c eeprom 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  539.279434] tm6000 #0: i2c eeprom 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  539.490481] tm6000 #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  539.702029] tm6000 #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  539.913647] tm6000 #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  540.124427] tm6000 #0: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  540.336254] tm6000 #0: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  540.546870] tm6000 #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  540.757396] tm6000 #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  540.967456] tm6000 #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  541.178465] tm6000 #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  541.389352] tm6000 #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  541.598677] tm6000 #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  541.809451] tm6000 #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  542.006873] Device has eeprom but is currently unknown
[  542.013834] Found tm6000
[  542.550218] tuner 8-0061: Tuner -1 found with type(s) Radio TV.
[  542.550237] xc2028 8-0061: creating new instance
[  542.550240] xc2028 8-0061: type set to XCeive xc2028/xc3028 tuner
[  542.550242] Setting firmware parameters for xc2028
[  542.550321] xc2028 8-0061: Loading 77 firmware images from xc3028-v24.fw, type: xc2028 firmware, ver 2.4
[  542.550327] tm6000 #0: registered device video1
[  542.550330] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[  542.937052] xc2028 8-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[  548.299291] xc2028 8-0061: Loading firmware for type=(0), id 000000000000b700.
[  548.723642] SCODE (20000000), id 000000000000b700:
[  548.723652] xc2028 8-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.   

Utilizando a firmware xc3028-v24.fw disponível no repositório git https://github.com/OpenELEC/dvb-firmware/blob/master/firmware/xc3028-v24.fw
Código Selecionar
  sudo cp xc3028-v24.fw /lib/firmware   

Não será possível activar a recepção DVB  e desactivar a recepção analógica ?
Quando faço o seguinte comando .
Citarsudo modprobe tm6000_dvb   
e depois
Código Selecionar
  user@pc:/lib/firmware$ dmesg | grep dvb
[ 2147.309150] tm6000 #0: Initialized (TM6000 dvb Extension) extension   
Supostamente  a recepção DVB fica activada , mas quando executo  o   w_scan

Código Selecionar
  w_scan -x > AutoFrequencies
w_scan version 20130331 (compiled for DVB API 5.10)
guessing country 'PT', use -c <country> to override
using settings for PORTUGAL
Country identifier PT not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format initial tuning data
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
main:3228: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
 
Não detecta a recepção DVB  , será porque a recepção analógica esta activa ? 


Encontrei também uma suposta driver para minha pen USB dvb-t Trident TVMaster TM6000
https://github.com/OpenELEC/linux/tree/master/drivers/media/usb/tm6000
@CMatomic
Imprimir
Ir para o topo Páginas1
Ações