instalaçao webcam lg

[henk]

Ola amigos estou com uma webcam LG webpro 2 lic 300 com chip Z-Star Microelectronics Corp. ZC0302 no Ubuntu 10.04 mas não consigo fazer ela funcionar, tenho instalado o camorama,quando abro aparece esse erro "Unable to capture image",quando digito o comando "lsusb" aparece isso

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 026: ID 0ac8:0302 Z-Star Microelectronics Corp. ZC0302 Webcam
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 038: ID 0951:1607 Kingston Technology DataTraveler 100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

qual procedimento devo tomar ??muito agradecido

 

[Tota]

Logo depois de plugar a camera na usb, entre em terminal e cole aqui as ultimas 15 linhas do comando

Código:

sudo dmesg

[asghan]

Tenho uma cam igual a sua, já tentou usar o Chesse ?

[henk]

fiz apareceu isso,desconectei a cam coloquei e abri o terminal digitei "sudo dmesg"
[ 3527.619024] VFS: busy inodes on changed media or resized disk sr0
[ 3527.621094] VFS: busy inodes on changed media or resized disk sr0
[ 3527.622993] VFS: busy inodes on changed media or resized disk sr0
[ 3527.641995] VFS: busy inodes on changed media or resized disk sr0
[ 3527.645427] VFS: busy inodes on changed media or resized disk sr0
[20575.488070] usb 2-2: USB disconnect, address 2
[20575.488278] gspca: disconnect complete
[20588.760046] usb 2-2: new full speed USB device using uhci_hcd and address 3
[20589.026296] usb 2-2: configuration #1 chosen from 1 choice
[20589.029215] gspca: probing 0ac8:0302
[20589.263161] zc3xx: probe sif 0x0000
[20590.963420] zc3xx: probe 2wr ov vga 0x0000
[20591.008428] zc3xx: probe sensor -> 0011
[20591.008433] zc3xx: Find Sensor HV7131R(c)
[20591.012532] gspca: probe ok
depois copiei e colei as ultimas 15 linhas deu isso
root@marcio-desktop:/home/marcio# [ 3527.619024] VFS: busy inodes on changed media or resized disk sr0
bash: [: faltando `]'
root@marcio-desktop:/home/marcio# [ 3527.621094] VFS: busy inodes on changed media or resized disk sr0
bash: [: faltando `]'
root@marcio-desktop:/home/marcio# [ 3527.622993] VFS: busy inodes on changed media or resized disk sr0
bash: [: faltando `]'
root@marcio-desktop:/home/marcio# [ 3527.641995] VFS: busy inodes on changed media or resized disk sr0
bash: [: faltando `]'
root@marcio-desktop:/home/marcio# [ 3527.645427] VFS: busy inodes on changed media or resized disk sr0
bash: [: faltando `]'
root@marcio-desktop:/home/marcio# [20575.488070] usb 2-2: USB disconnect, address 2
[20575.488070]: command not found
root@marcio-desktop:/home/marcio# [20575.488278] gspca: disconnect complete
[20575.488278]: command not found
root@marcio-desktop:/home/marcio# [20588.760046] usb 2-2: new full speed USB device using uhci_hcd and address 3
[20588.760046]: command not found
root@marcio-desktop:/home/marcio# [20589.026296] usb 2-2: configuration #1 chosen from 1 choice
[20589.026296]: command not found
root@marcio-desktop:/home/marcio# [20589.029215] gspca: probing 0ac8:0302
[20589.029215]: command not found
root@marcio-desktop:/home/marcio# [20589.263161] zc3xx: probe sif 0x0000
[20589.263161]: command not found
root@marcio-desktop:/home/marcio# [20590.963420] zc3xx: probe 2wr ov vga 0x0000
[20590.963420]: command not found
root@marcio-desktop:/home/marcio# [20591.008428] zc3xx: probe sensor -> 0011
[20591.008428]: command not found
root@marcio-desktop:/home/marcio# [20591.008433] zc3xx: Find Sensor HV7131R(c)
bash: erro de sintaxe próximo do `token' não esperado `('
root@marcio-desktop:/home/marcio# [20591.012532] gspca: probe ok
[20591.012532]: command not found

[Tota]

Bom, agora em terminal digite

Código:

sudo lsmod | grep spca5xx

Tem que aparecer isto:

spca5xx     687856  0
videodev    7232  1 spca5xx
usbcore     103204  7 spca5xx,ehci_hcd,snd_usb_audio,eagle_usb,uhci_hcd

no aguardo....

[henk]

nada ainda coloquei o comando "lsmod | grep spca5xx" nao deu nada quando configuro ela no amsn ele aparece imagem acende a luz que a webcam tem no final da um erro com farsight,mas no camorama da erro o que pode ser ?

[Tota]

nada ainda coloquei o comando "lsmod | grep spca5xx" nao deu nada

Como não deu nada? ou daria a resposta que postei ou algum erro.

[henk]

quando eu dou o comando "lsmod" aparece isso

Module                  Size  Used by
binfmt_misc             6587  1
snd_usb_audio          75765  1
snd_usb_lib            15801  1 snd_usb_audio
vboxnetadp              6390  0
vboxnetflt             12740  0
vboxdrv               168753  2 vboxnetadp,vboxnetflt
snd_hda_codec_idt      51978  1
snd_hda_intel          21941  5
snd_hda_codec          74201  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep               5412  2 snd_usb_audio,snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  2 snd_pcm_oss
snd_pcm                70662  5 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
snd_rawmidi            19056  2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ppdev                   5259  0
fbcon                  35102  71
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
it87                   17548  0
gspca_zc3xx            45189  0
nvidia               7087672  34
gspca_main             21199  1 gspca_zc3xx
videodev               34361  1 gspca_main
v4l1_compat            13251  1 videodev
softcursor              1189  1 bitblit
hwmon_vid               2298  1 it87
parport_pc             25962  1
snd                    54148  23 snd_usb_audio,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp              24119  0
vga16fb                11385  1
vgastate                8961  1 vga16fb
psmouse                63245  0
serio_raw               3978  0
agpgart                31724  2 nvidia,intel_agp
soundcore               6620  2 snd
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
lp                      7028  0
parport                32635  3 ppdev,parport_pc,lp
8139too                18545  0
8139cp                 16186  0
mii                     4381  2 8139too,8139cp


agora esse comando "lsmod | grep spca5xx" nao da nada

[jvvasques]

Bom dia Pessoal,
Tenho uma LG INovia WebPro3 RCW-300 que não esta querendo funcionar, já testei o Cheese e nada. O engraçado que ela tem o microfone embutido e ele funciona.
Aguem pode dar uma ajuda?
Obrigado!

[conflito]

Boa noite pessoal,
Alguém conseguiu por acaso instalar o driver da Web cam LG lic-300 no Ubuntu 10.4?
Quando do o comando lsusb aparece:
user@ubuntu:~/Downloads/sn9c1xx-1.48$ lsusb
Bus 002 Device 003: ID 0810:0003 Personal Communication Systems, Inc.
Bus 002 Device 002: ID 0c45:60fc Microdia PC Camera with Mic (SN9C105)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

seguindo o comando "sudo dmesg" sugerido pelo amigo as ultimas 17 linhas deu:

[   19.674320] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   20.902588] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   20.902592] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[   20.902593] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   20.902594] vboxdrv: the usage of hardware performance counters by
[   20.902595] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   20.902598] vboxdrv: Found 4 processor cores.
[   20.903029] vboxdrv: fAsync=0 offMin=0x467 offMax=0xd31b
[   20.903390] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   20.903392] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
[   29.712025] eth0: no IPv6 routers present
[   34.028500] ISO 9660 Extensions: Microsoft Joliet Level 3
[   34.149061] ISOFS: changing to secondary root
[ 2387.185811] usb 2-2: Device video0 is already in use
[ 2387.185817] usb 2-2: A blocking open() has been requested. Wait for the device to be released...
[ 2537.084255] usb 2-2: Device video0 is already in use
[ 2537.084258] usb 2-2: A blocking open() has been requested. Wait for the device to be released...

Já instalei o cheese e o camorama, mas até agora sem sucesso algum, será que alguém pode me ajudar?

Conflito