configurar a placa de captura ENLTV-FM3 no ubuntu 11.04

[joaoleite]

bom dia,eu nao estou conseguindo configurar minha placa de captura ENLTV-FM3 no meu ubuntu 11.04,sou leigo e não sei os comandos direitos que é necessario para configurar essa placa no meu pc,e tbm uso uma webcam que ja esta funcionando,so a tv que nao pega nem no tvtime e nem no xawtv.

segue o dmesg | grep saa,isso pq copiei do site para poder postar aqui e colei no terminal:

joao@joao:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
02:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)
03:00.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)


joao@joao:~$ dmesg | grep saa
[   17.461393] saa7130/34: v4l2 driver version 0.2.16 loaded
[   17.461460] saa7134 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   17.461468] saa7134[0]: found at 0000:03:00.0, rev: 1, irq: 20, latency: 32, mmio: 0xfdbff000
[   17.461475] saa7134[0]: subsystem: 1a7f:2108, board: Encore ENLTV-FM [card=107,insmod option]
[   17.461493] saa7134[0]: board init: gpio is 41000
[   17.502085] input: saa7134 IR (Encore ENLTV-FM) as /devices/pci0000:00/0000:00:1e.0/0000:03:00.0/rc/rc0/input4
[   17.502165] rc0: saa7134 IR (Encore ENLTV-FM) as /devices/pci0000:00/0000:00:1e.0/0000:03:00.0/rc/rc0
[   17.672035] saa7134[0]: i2c eeprom 00: 7f 1a 08 21 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   17.672048] saa7134[0]: i2c eeprom 10: 00 ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[   17.672060] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08 ff 00 29 ff ff ff ff
[   17.672072] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672083] saa7134[0]: i2c eeprom 40: 50 90 00 c0 84 ff 03 30 00 05 ff ff ff ff ff ff
[   17.672095] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff 8c 84 ff 31 30 4d 4f 4f 4e
[   17.672106] saa7134[0]: i2c eeprom 60: 53 50 44 41 31 30 30 ff 41 ff ff ff ff ff ff ff
[   17.672118] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672129] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672141] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672153] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672164] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672176] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672187] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672199] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.672210] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.733032] tuner 14-0060: chip found @ 0xc0 (saa7134[0])
[   17.764237] saa7134[0]: registered device video1 [v4l2]
[   17.765380] saa7134[0]: registered device vbi0
[   17.765509] saa7134[0]: registered device radio0
[   17.789717] saa7134 ALSA driver for DMA sound loaded
[   17.789746] saa7134[0]/alsa: saa7134[0] at 0xfdbff000 irq 20 registered as card -2

[Tota]

[   17.764237] saa7134[0]: registered device video1 [v4l2]
[   17.765380] saa7134[0]: registered device vbi0
[   17.765509] saa7134[0]: registered device radio0
[   17.789717] saa7134 ALSA driver for DMA sound loaded
[   17.789746] saa7134[0]/alsa: saa7134[0] at 0xfdbff000 irq 20 registered as card -2

Ola

como dá para ver, sua placa foi setada como video1 ( e provavelmente sua webcam é video2 )

no "output" do dmesg é informado que sua placa recebeu um card=107

Falta portanto ajustar o tuner.

veja no forum como fazer isto, existem varios topicos sobre placas de captura

veja o site do usuario mstr => http://mstr.ueuo.com/

E finalmente, o som de sua placa não está ajustado (saa7134[0]/alsa: saa7134[0] at 0xfdbff000 irq 20 registered as card -2) pois deveria ser card0 ou card1, não -2, isto poderá ser ajustado depois de arrumada a recepção dos canais.

[]'s

[joaoleite]

eu tentei fazer conforme me explicou,so que nao sei mexer no terminal e nem digitar esses comandos ai que vc sugere,e qd copio e cola e dou enter o que foi sugerido nao funfa.