Problema depois de tentar instalar Compiz no Gutsy e a saga continua

[rjbgbo]

Que tristeza, tava indo tudo muito bem depois de minha atualização do 7.04 p/ 7.10.
Eis que eu mesmo é que fiz o que ñ devia. Na tentativa de ver o compiz fusion.

Já tinha instaladao satisfatoria/ o drive mais atual da ATI pelo Envy, da minha ATI Radeonx300se PCI-Express

Então fui a luta pelo Compiz Fusion, no forum internacional do Ubuntu e dentes os tópicos resolvi experimentar esse: http://ubuntu-utah.ubuntuforums.org/showthread.php?t=569654

If you are doing fresh install of Gutsy

   1. Enable fgrlx driver.

      Install linux-restricted-modules and restricted-manager provied in the restricted repositories:
      Code:

      sudo apt-get update
      sudo apt-get install linux-restricted-modules-generic restricted-manager

      Open the restricted drivers manager in "System -> Administration -> Restricted Drivers Manager" and select "ATI accelerated graphics driver".
   2. Install xserver-xgl package
      Code:

      sudo apt-get install xserver-xgl

   3. Install compiz
      Code:

      sudo apt-get install compizconfig-settings-manager compiz compiz-core compiz-fusion-plugins-main compiz-fusion-plugins-extra compiz-gnome compiz-plugins libcompizconfig-backend-gconf libcompizconfig0

   4. Reboot
   5. Log in. 3D effects should be enabled!
   6. Customize Compiz Fusion.
      Select System → Preferences → Advanced Desktop Effects Settings
      In the new window, General Options → Desktop Size → Horizontal Virtual Size. Set it to 4.
      The other two options have to be left at 1.

NÃO FUNCIONOU!!!!

O programa da ATI passou a dar problema então, pelo Envy desinstalei o drive ATI e depois o nova/ instalei pelo Envy. foi um sufoco quase que fiquei s/ o modo gráfico.

Consegui restaurá-lo aos trancos, mas o programa da ATI, mostra a tela abaixo:



Verifiquei o aticonfig:

Código: [Selecionar]

rjbgbo@rjbgbo-desktop:~$ aticonfig
Usage: aticonfig [OPTION] ...
Parses an existing X-Server configuration file and modifies it to operate with
ATI products.

The following command-line options can be invoked as parameters:

ATI Initial Configuration:
  --initial
        Generate a default ATI device section in the configuration file which
        is capable of loading the fglrx driver.
  --initial=dual-head
        Same as '--initial' but generate a basic dual head configuration file.
  --initial=check
        Identifies if the fglrx driver is present in configuration file.

TV Options:
  --tvf, --tv-format-type=STRING
        Change the TV signal format.  STRING can be one of:
           NTSC-M
           NTSC-JPN
           NTSC-N
           PAL-B
           PAL-COMB-N
           PAL-D
           PAL-G
           PAL-H
           PAL-I
           PAL-K
           PAL-K1
           PAL-L
           PAL-M
           PAL-N
           PAL-SECAM-D
           PAL-SECAM-K
           PAL-SECAM-K1
           PAL-SECAM-L
        Note: Not all graphics cards support every mode. Regional
              settings are applicable.
  --tvs, --tv-standard-type=STRING
        Change the TV standard for TV output.  STRING can be one of:
            VIDEO
            SCART
            YUV
 --tv-overscan={on|off}
       Enable or disable overscan mode for TVout
       Note, not all tv-formats support overscan. Try to
       toggle overscan off before changing tv-format if
       and error occurs.
 --tv-info
         Print out the current tv geometry, tv format, and if the
         tv is physically connected.
 --tv-geometry=WIDTHxHEIGHT{+|-}X{+|-}Y
              =WIDTHxHEIGHT
         Change the size and position of the TVout display.
         WIDTH and HEIGHT are in percentage units. Please note
         that the valid range for WIDTH and HEIGHT depends on
         the tv-format selected. However, as a rule of thumb 
         WIDTH and HEIGHT are valid in the range [1,100] 
         X and Y are pixels offsets from centre
         of the screen. X and Y are have variable ranges dependant
         on ASIC. Use tv-info to get valid X and Y ranges
         If tv-geometry is invoked with just width and height
         then X and Y are assumed to be 0
         See example 5 below for a sample usage.

FireGL Workstation Board Features:
  --app, --use-app-profile=STRING
        Change the application profile for a FireGL workstation board.
        STRING can be one of:
            default
            maya
            softimage-xsi
            softimage-3d
            houdini4.0
            houdini5.0
            houdini5.5
FSAA Options:
  --fsaa={on|off}
        Enable/disable full scene anti-aliasing.  Enable this option to enhance
        photo-realism in 3D rendering.  Disable it to get the most accurate 3D
        image.
  --fs, --fsaa-samples={off,0,2,4,6}
        Set the number of FSAA samples per pixel or 2, 4, 6.  off is the same
        as setting 0 samples.
  --fsg, --fsaa-gamma={on|off}
        Enable/disable FSAA gamma.
  --fmsp, --fsaa-ms-positions=x0,y0,x1,y1,x2,y2,x3,y3,x4,y4,x5,y5
        Change the FSAA Multi-Sample Positions for x0,y0 to x5,y5.  You must
        specify exactly 12 real number values separated by commas.

Screen-Related Options:
  --ovt, --overlay-type=STRING
        Change the overlay for the X server.  STRING can be one of:
            opengl
            Xv
            disable
  --ovon, --overlay-on={0|1}
        Choose which head the hardware overlay should be visible on.  The
        hardware overlay can be used for either OpenGL, video, pseudo-color
        or stereo.
  --lcd, --lcd-mode=STRING
        Change the LCD mode.  STRING can be one of:
            center
            full
  --dtop, --desktop-setup=STRING
        Change the desktop setup for multiple display adapters.
        STRING can be one of:
            single              1 screen, second dark
            mirror              2 screens - same content, identical
                                refresh rate/resolution
                                Note: This option is NOT supported with Avivo
            clone               2 screens - same content, allows for
                                different refresh rates/resolutions
            horizontal          2 screens - one framebuffer,
                                screen 1 right of screen 0
            horizontal,reverse  2 screens - one framebuffer,
                                screen 1 left of screen 0
            vertical            2 screens - one framebuffer,
                                screen 1 above of screen 0
            vertical,reverse    2 screens - one framebuffer,
                                screen 1 below of screen 0
        Note:  This option is not valid if '--initial=dual-head' is specified.
  --vs, --sync-vsync={on|off}
        Enable/disable sync buffer swaps with vsync.  Enable this option to
        prevent tearing during 3D rendering.
  --psc, --pseudo-color={on|off}
        Enable/disable pseudo-color visuals.  Enable this option to get 16-bit
        color support.
  --stereo={on|off}
        Enable/disable quad-buffer stereo support.  Enable this option only for
        using applications that support the use of hardware 3D shutter glasses.
  --ss, --stereo-sync={on|off}
        Enable/disable quad-buffer stereo sync.  Enable this option to get 3D
        glasses to synchronize with the infrared transmitter.
  --resolution=Screen#,W1xH1,W2xH2,W3xH3,...
        Set the modes for the specified screen.  You may specify several
        resolutions separated by commas.
        Screens start at 0.  You can use 1 for dual-head
  --hsync=Screen#,LOW-HIGH
        Change the horizontal sync range of the specified monitor.  Make sure
        you know the capabilities of your monitor before changing this option.
        Screens start at 0.  You can use 1 for dual-head
  --vrefresh=Screen#,LOW-HIGH
        Change the vertical refresh range of the specified monitor.  Make sure
        you know the capabilities of your monitor before changing this option.
        Screens start at 0.  You can use 1 for dual-head
  --hsync2=LOW-HIGH
        Change the horizontal sync range of the second display.  Make sure you
        know the capabilities of your monitor before changing this option.
  --vrefresh2=LOW-HIGH
        Change the vertical refresh range of the second display.  Make sure you
        know the capabilities of your monitor before changing this option.
  --mode2=W1xH1,W2XH2,W3xH3,...
        Change the modes for the second display.  You may specify several
        resolutions separated by commas.  Only valid for clone and big desktop
        settings.
  --screen-layout={left|right|above|below}
        Set the secondary screen position for dual head.
  --screen-overlap=NUM
        Set the screen overlap region in big desktop mode to be NUM pixels.
  --force-monitor=STRING[,STRING...]
        Describe all displays that are to be enabled and/or disabled regardless
        of physical connection.  STRING can be one or more of the following
        set, separated by commas:
            crt1
            crt2
            lvds
            tv
            tmds1
            tmds2
            tmds2i
            nocrt1
            nocrt2
            nolvds
            notv
            notmds1
            notmds2
            notmds2i

POWERplay Options:
  Following options will not change the config file.
  These options will be effective immediately. Other options on
  the same command line will be ignored.
  --lsp, --list-powerstates
        Print information about power states and exit.
  --set-powerstate=NUMBER
        Set a power state listed by --list-powerstates.

Advanced Options:
  --sync-video
        Enable/disable sync to vsync for AVIVO video.
        This option is enabled by default and is used to prevent
        video tearing. By disabling this option video is free to
        render as fast as the 3D engine can handle. In the case of
        choppy video try to disable sync-video.
  --tls={on|off}
        Enable/disable fast thread local storage.  Disable this option when
        virtual machines or WineX fail to work properly.
  --sb, --signal-block={on|off}
        Enable/disable signal blocking.  Disable this option when debugging a
        multi-threaded OpenGL application.
  --locked-userpages={on|off}
        Enable/disable locked user pages. Disable this option if the system
        hangs when running fgl_glxgears.
        User page lock is no longer available on AGP system now.
  --gcpu, --generic-cpu={on|off}
        Enable/disable generic CPU.  Use this option if the CPU is being
        reported improperly.  For example: If you have an AMD cpu that is
        being reported as Intel.
  --max-gart-size=NUMBER
        Set user-defined max GART size for non-AGP systems.
        Possible integer values are from 64 to 512 (mb).

Dynamic Display Management Options:
  Following options will not change the config file. They are
  used for querying driver, controller and adaptor information.
  These options will be effective immediately. Other options on
  the same command line will be ignored.
  --enable-monitor=STRING,STRING
        Setting current monitor to be enabled. Only 2 displays
        can be enabled at the same time. Any displays
        that are not on the list will be disabled.
        STRING can be one of the following set, separated
        by commas:
            none
            crt1
            crt2
            lvds
            tv
            tmds1
            tmds2
            auto   -- use default policy to enable the displays.
  --query-monitor
        This will return connected and enabled monitor information
  --swap-monitor
        This only works for big desktop setup. This will swap the
        contents on the two monitors.
  --swap-screens={on|off}
        Enable/disable swap heads in dual-head mode.
        This option works only in dual-head mode.

Pair mode options:
  Following options are used for query add and remove pair modes.
  These options will be effective immediately. Other options on   
  the same command line will be ignored.
  --list-pairmode
        list all the current existing pair modes the driver can use.
  --add-pairmode=width0xheight0+width1xheight1
        Add one pair mode to the list. width0 and height0 are the
        size of primary display and width1 and height1 for the
        secondary  display.
  --remove-pairmode=index
        Remove one pair mode from the list. User can get index by
        list-pairmode.

External Events Daemon Options:
  Following options will not change the config file. They are
  used to send commands to the atieventsd external events daemon.
  --set-policy=STRING
        Sets the event policy for the daemon to be STRING.
        See the atieventsd(8) manpage for further details.

Display attribute options:
  Following options are used for query and set adjustment of
  specific attribute for specific display. These options will be
  effective immediately. Other options on the same command line
  will be ignored.
  The DISPLAYTYPE in options can be one of the following strings:
        crt1, lvds, tv, tmds1, crt2, tmds2, cv, tmds2i .
   The ATTRIBTYPE in options can be one of the following strings:
        brightness, contrast, saturation, hue, positionX,
        positionY, sizeX, sizeY, overscan, videoStandard 
  --query-dispattrib=DISPLAYTYPE,ATTRIBTYPE
        query the specific adjustment info of the specific display.
        if ATTRIBTYPE is not specified, all supported attribute
        information will be printed out.
  --set-dispattrib=DISPLAYTYPE,ATTRIBTYPE:VALUE
        set the attribute value of the specific display.

Connector type options:
  Following options are used for query connector type
  for specific display. These options will be
  effective immediately. Other options on the same command line
  will be ignored.
  The DISPLAYTYPE in options can be one of the following strings:
        crt1, lvds, tv, tmds1, crt2, tmds2, cv, tmds2i .
   --query-connectortype=DISPLAYTYPE
        query the connector type of the specific display.

Component video dongle options:
  Following options are used for query and set dongles for a
  component video. These options will be effective immediately.
  Other options on the same command line will be ignored.
  --query-cvdongle
        query dongle setting informations of the component video.
  --set-cvdongle=VALUE
        set the custom override value of the CV dongle.
  --reset-cvdongle
        reset the custom override setting(to zero)of the CV dongle.

Component video customized mode options:
  Following options are used for query and set customized mode for
  component video. These options will be effective immediately.
  Other options on the same command line will be ignored.
  --query-cvmode
        query customized modes for component video.
  --add-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEDHEIGHT,REFRESH.
        add a customized mode for component video.
  --validate-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEHEIGHT,REFRESH.
        validate a customized mode for component video.
  --delete-cvmode=INDEX
        delete one customized mode for component video.

Miscellaneous Options:
  -v, --verbose
        Show what aticonfig is doing.
  -q, --quiet
        Disable all information output except for errors.
  --effective={now,startup}
        Choose when the requested changes should take effect.
            now:     Immediately.  This change will affect the running X
                     session if applicable.  Only 'set-powerstate' and
                     'overlay-on' are applicable for now.
            startup: On future X server startups.  This change will modify the
                     X server configuration file if applicable.
        The default is 'now,startup', i.e., do both as applicable.
  --nobackup
        Do not make an automatic backup of the configuration file.
  -i, --input=FILE
        Select a FILE to input as the configuration file. Set FILE to '-' to
        pipe from standard input.  Without this option, aticonfig will search
        /etc/X11 for the default configuration file.
  -o, --output=FILE
        Select a FILE to output the new configuration file to.  Set FILE to '-'
        to print to standard output.  Without this option, aticonfig will
        replace the input file with the newly generated file.
  -h, --help
        Display this help screen.
  -f, --force
        Only valid with 'initial' option.  Force aticonfig to generate default
        Monitor, Device, and Screen sections even if the original configuration
        file has invalid settings in these sections.

Examples:
  1. Setting up fglrx for the first time.
       Single head :    aticonfig --initial --input=/etc/X11/xorg.conf
       Dual head   :    aticonfig --initial=dual-head --screen-layout=above
                        This command will generate a dual head configuration
                        file with the second screen located above the first
                        screen.
  2. Setting up big desktop to horizontal and set overlay on secondary display.
                        aticonfig --dtop=horizontal --overlay-on=1
  3. Setting up modes for primary display.
                        aticonfig --resolution=0,1600x1200,1280x1024,1024x768
  4. Force primary CRT on and TV-out off.
                        aticonfig --force-monitor=crt1,notv
  5. Change tv geometry
                         aticonfig --tv-geometry=85x90+10-10
         This will set tv to 85% width (where 100% ==
         overscan) 90% height and shift 10 pixels right of centre
         and 10 pixels down of centre.

Please report bugs to http://support.ati.com

[rjbgbo]

E aqui está como o xorg.conf ficou:

Código: [Selecionar]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Busid "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "L1750S"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "L1750S"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection







Section "Extensions"
Option "Composite" "Disable"
Option "Composite" "0"
EndSection

Dessa vez tô precisando mesmo de uma ajuda, porque ficou díficil e se pensa logo em instalar tudo de novo.

[prct]

Também tive os mesmos problemas.

http://ubuntuforums.org/showthread.php?t=548785

Resolvi com isto.

[rjbgbo]

Valeu caro prct pela atenção.

Acabei optando por reinstalar tudo de novo. Eis a novidade.

Segui o seguinte tuto:

Before we begin -- supported hardware list

Taken from fglrx driver description for Gutsy.

This version of the ATI driver officially supports:

* FireGL: V7350, V7300, V7200, V7100, V5200, V5100, V5000, V3400,
V3300, V3200, V3100, X3-256, X3, X2-256, Z1-128, T2-128,
X1-128, X1-256p
* FireMV: 2200 (Single card PCI-e configuration)
* Mobility FireGL: V5000, T2
* Mobility Radeon: X1800, X1600, X1400, X1300, X800, X700, X600, X300,
9800, 9600, 9550, 9500
* Radeon Xpress: 200M series, 1250 IGP, 200 series
* Radeon: X1900, X1800, X1600, X1300, X850, X800, X700, X600, X550,
X300, 9800, 9700, 9600, 9550, 9500

ATI All-in-Wonder variants of the above cards/chips are also supported,
but video capture is not.

If you are doing fresh install of Gutsy

   1. Enable fgrlx driver.

      Install linux-restricted-modules and restricted-manager provied in the restricted repositories:
      Code:

      sudo apt-get update
      sudo apt-get install linux-restricted-modules-generic restricted-manager

      Open the restricted drivers manager in "System -> Administration -> Restricted Drivers Manager" and select "ATI accelerated graphics driver".
   2. Install xserver-xgl package
      Code:

      sudo apt-get install xserver-xgl

   3. Install compiz
      Code:

      sudo apt-get install compizconfig-settings-manager compiz compiz-core compiz-fusion-plugins-main compiz-fusion-plugins-extra compiz-gnome compiz-plugins libcompizconfig-backend-gconf libcompizconfig0

   4. Reboot
   5. Log in. 3D effects should be enabled!
   6. Customize Compiz Fusion.
      Select System → Preferences → Advanced Desktop Effects Settings
      In the new window, General Options → Desktop Size → Horizontal Virtual Size. Set it to 4.
      The other two options have to be left at 1.

      Continue customization per Forlong's guide at http://forlong.blogage.de/article/20...-Compiz-Fusion
Fonte: http://ubuntuforums.org/showthread.php?t=569654&highlight=x300+gutsy

OK!!! 
Deixei os efeitos normais.

Meu atual xorg.conf

Código: [Selecionar]

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Driver "fglrx"
Busid "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Monitor Genérico"
Option "DPMS"
Horizsync 30-70
Vertrefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "Monitor Genérico"
Defaultdepth 24
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
Testando com - http://wiki.cchtml.com/index.php/Ubuntu_Gutsy_Installation_Guide

fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon X300/X550/X1050 Series
OpenGL version string: 2.0.6473 (8.37.6)

Na tela de login vem uma tela maior que o 1280x1024, e uma tela preta antes de entrar o desktop.
Meu monitor é um LCD 17'' genérico.

Tô procurando solução, mas ñ encontrei uma que me possa basear c/ segurança, deixei também um post no fórum internacional.
Caro prct, a dica:

Then find this and change the "0" to "1"

Code:

Section "Extensions"
   Option      "Composite"   "1"
EndSection

Fonte: http://ubuntuforums.org/showthread.php?t=548785

P/ as ATI 200M card, também são válidas p/ as ATI x300?

[prct]

Instala a ati :

http://dfthiagodf.wordpress.com/2006/08/15/instalando-driver-ati-no-ubuntu-dapper/

Depois informa-me.

Um abraço.

[rjbgbo]

Instala a ati :

http://dfthiagodf.wordpress.com/2006/08/15/instalando-driver-ati-no-ubuntu-dapper/

Depois informa-me.

Um abraço.

prct, eu poderia instalar o novo drive pelo Envy: http://www.guiaubuntupt.org/wiki/index.php?title=Envy

[prct]

Não te aconselho. Já tentei dessa forma e nada. Mas podes tentar. Depois diz qq.

[Warriorlol]

ih cara

eu tbm tive esse MESMO problema

fiz essas MESMAS coisas hahah

ficou funfando os jogos em 3D FULL, super rapido, mas sem desktop effects, depois, ajustei dessamaneira ai, ficou funfando os desktop effects FULL, e os jogos nao funfaram uhauhauh

eu desisti.. vo esperar outra versao de driver sair (espero q nao demore)

mas to te alerta pra se eu ver como instalar, by the way, minha placa eh uma ATI Radeon 9600 series, 256mb, 400mhz XD