Como instalar no ubuntu 12.10 o receptor PixelView PlayTV SBTV - Full Seg?

[Bignildo]

Ola, galera!
Bom sou novo no linux, tenho pelo menos uma semana. E estou querendo mudar de vez para ele. Mas não estou conseguindo instalar o receptor digital usb PixelView PlayTV SBTV - Full Seg.
Já tentei fazer o tutorial deste site: http://dougsland.livejournal.com/103169.html, e não deu certo.
Quando chega nesta parte
- Instalando firmware

wget http://www.wi-bw.tfh-wildau.de/~pboettch/home/files/dvb-usb-dib0700-1.20.fw
cp dvb-usb-dib0700-1.20.fw /lib/firmware

Não dar certo. Mostra como se o link não fosse mais válido.

Abraço!

Bignildo

[Tota]

Ola

Plugue seu pen sbtv e depois poste o resultado em terminal de

Código: [Selecionar]

lsusb
A seguir poste as ultimas 30 linhas de

Código: [Selecionar]

sudo dmesg
Com isto o forum poderá ver se e como seu pen foi reconhecido.

[]'s

[Bignildo]

Ola, Tota!
O meu sistema é o Ubuntu Studio 12.10 (amd 64)
lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 002 Device 004: ID 045e:0766 Microsoft Corp.
Bus 001 Device 004: ID 1554:5010 Prolink Microsystems Corp.
Bus 001 Device 005: ID 0cf3:1006 Atheros Communications, Inc. TP-Link TL-WN322G v3 / TL-WN422G v2 802.11g [Atheros AR9271]
Bus 001 Device 006: ID 0c10:0000 

sudo dmesg
[   10.954006] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   10.954007] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   10.954008] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   10.954009] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   10.954010] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   10.954011] cfg80211: Disabling freq 2484 MHz
[   10.954013] cfg80211: Regulatory domain changed to country: CN
[   10.954014] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.954015] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   10.954016] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   11.242190] init: failsafe main process (855) killed by TERM signal
[   11.789861] type=1400 audit(1361902379.476:: apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=944 comm="apparmor_parser"
[   11.790121] type=1400 audit(1361902379.476:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=944 comm="apparmor_parser"
[   11.790264] type=1400 audit(1361902379.476:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=944 comm="apparmor_parser"
[   11.943431] type=1400 audit(1361902379.629:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=949 comm="apparmor_parser"
[   12.923964] ppdev: user-space parallel port driver
[   13.427858] Bluetooth: RFCOMM TTY layer initialized
[   13.427862] Bluetooth: RFCOMM socket layer initialized
[   13.427863] Bluetooth: RFCOMM ver 1.11
[   13.549686] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.549690] Bluetooth: BNEP filters: protocol multicast
[   16.388396] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.390014] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.397481] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[   16.410792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.413300] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.818474] wlan0: authenticate with 7c:4f:b5:ee:f5:31
[   18.910697] wlan0: send auth to 7c:4f:b5:ee:f5:31 (try 1/3)
[   18.914506] wlan0: authenticated
[   18.961940] wlan0: associate with 7c:4f:b5:ee:f5:31 (try 1/3)
[   18.985995] wlan0: RX AssocResp from 7c:4f:b5:ee:f5:31 (capab=0x431 status=0 aid=2)
[   18.991462] wlan0: associated
[   18.992048] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[Tota]

Ola

Bus 001 Device 004: ID 1554:5010 Prolink Microsystems Corp.

Esta é a sua placa de tv.

Vá em drivers adicionais e veja se existe alguma coisa sobre ela ali.

Se tiver, instale.

Depois instale em terminal

Código: [Selecionar]

sudo apt-get install vlc dvb-apps
Tudo instalado veja este site para gerar sua lista de canais=> http://www.e-secure.com.br/index.php?entry=entry100513-161959

Se ainda precisar do firmware baixe daqui =>http://linuxtv.org/downloads/firmware/dvb-usb-dib0700-1.20.fw

Qualquer duvida volte a postar

[]'s

[Bignildo]

Tota, por favor verifica com os dados abaixos se estou fazendo procedimento certo?
root@bignildo:/home/nildo# cat > ch_freq.conf << .EOF.
> UHF channels 14 to 69
> T 473142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 14
> T 479142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 15
> T 485142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 16
> T 491142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 17
> T 497142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 18
> T 503142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 19
> T 509142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 20
> T 515142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 21
> T 521142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 22
> T 527142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 23
> T 533142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 24
> T 539142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 25
> T 545142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 26
> T 551142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 27
> T 557142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 28
> T 563142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 29
> T 569142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 30
> T 575142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 31
> T 581142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 32
> T 587142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 33
> T 593142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 34
> T 599142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 35
> T 605142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 36
> # channel 37 not used
> T 617142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 38
> T 623142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 39
> T 629142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 40
> T 635142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 41
> T 641142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 42
> T 647142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 43
> T 653142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 44
> T 659142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 45
> T 665142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 46
> T 671142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 47
> T 677142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 48
> T 683142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 49
> T 689142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 50
> T 695142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 51
> T 701142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 52
> T 707142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 53
> T 713142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 54
> T 719142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 55
> T 725142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 56
> T 731142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 57
> T 737142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 58
> T 743142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 59
> T 749142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 60
> T 755142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 61
> T 761142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 62
> T 767142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 63
> T 773142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 64
> T 779142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 65
> T 785142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 66
> T 791142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 67
> T 797142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 68
> T 803142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 69
> .EOF.
root@bignildo:/home/nildo#  scan ch_freq.conf > channels.conf
scanning ch_freq.conf
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ERROR: cannot parse'UHF channels 14 to 69
'
Porque esta dando o seguinte erro:
>>> tune to: 473142857:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed: 22 Invalid argument
>>> tune to: 473142857:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed: 22 Invalid argument
>>> tune to: 479142857:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed: 22 Invalid argument
>>> tune to: 479142857:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed: 22 Invalid argument
>>> tune to: 485142857:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed: 22 Invalid argument
>>> tune to: 485142857:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed: 22 Invalid argument
>>> tune to: 491142857:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
__tune_to_transponder:1910: ERROR: Setting frontend parameters failed: 22 Invalid argument

Ah! Quanto aos drivers adicionais não tem nenhum para adicionar.

[Tota]

Voce instalou o firmware?

[Bignildo]

Desculpa, mas como é que instalo?

[Tota]

Ok

Remova o pen da usb

Digite no terminal

Código: [Selecionar]

sudo dmesg
Plugue o pen na usb e ainda com o terminal aberto digite o comando novamente

Código: [Selecionar]

sudo dmesg
Poste aqui as ultimas 30 linhas

Da outra vez que postou o resultado do dmesg, sua identificação de redes atrapalhou e eu não pude ver tudo

[]'s

[Tota]

Em tempo:
 Para instalar o firmware:

Código: [Selecionar]

cd /lib/firmware
sudo wget http://linuxtv.org/downloads/firmware/dvb-usb-dib0700-1.20.fw
Ou

Código: [Selecionar]

sudo apt-get install  linux-firmware  linux-firmware-nonfree
[]'s

[Bignildo]

119.224099] usb 1-1.4.1: new high-speed USB device number 12 using ehci_hcd
[19119.300432] usb 1-1.4.1: New USB device found, idVendor=1554, idProduct=5010
[19119.300438] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19119.300441] usb 1-1.4.1: Product: STK807X
[19119.300444] usb 1-1.4.1: Manufacturer: DiBcom
[19119.300446] usb 1-1.4.1: SerialNumber: 016
[19119.301882] dvb-usb: found a 'Prolink Pixelview SBTVD' in cold state, will try to load a firmware
[19119.303921] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[19119.511163] dib0700: firmware started successfully.
[19120.011731] dvb-usb: found a 'Prolink Pixelview SBTVD' in warm state.
[19120.011797] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[19120.011950] DVB: registering new adapter (Prolink Pixelview SBTVD)
[19120.239118] DVB: registering adapter 0 frontend 0 (DiBcom 8000 ISDB-T)...
[19120.443611] DiB0070: successfully identified
[19120.443624] Registered IR keymap rc-dib0700-nec
[19120.443709] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/rc/rc2/input13
[19120.443744] rc2: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/rc/rc2
[19120.443953] dvb-usb: schedule remote query interval to 50 msecs.
[19120.443957] dvb-usb: Prolink Pixelview SBTVD successfully initialized and connected.
[19120.517568] usb 1-1.4.3: new high-speed USB device number 13 using ehci_hcd
[19120.613473] usb 1-1.4.3: New USB device found, idVendor=0cf3, idProduct=1006
[19120.613481] usb 1-1.4.3: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[19120.613486] usb 1-1.4.3: Product: USB2.0 WLAN
[19120.613490] usb 1-1.4.3: Manufacturer: ATHEROS
[19120.613494] usb 1-1.4.3: SerialNumber: 12345
[19120.613995] usb 1-1.4.3: ath9k_htc: Firmware htc_9271.fw requested
[19120.677670] usb 1-1.4.4: new full-speed USB device number 14 using ehci_hcd
[19120.764439] usb 1-1.4.4: New USB device found, idVendor=0c10, idProduct=0000
[19120.764445] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19120.764449] usb 1-1.4.4: Product: SiW
[19120.764451] usb 1-1.4.4: Manufacturer: SiW
[19120.764454] usb 1-1.4.4: SerialNumber: 2600B0720200
[19120.904401] usb 1-1.4.3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[19121.139811] ath9k_htc 1-1.4.3:1.0: ath9k_htc: HTC initialized with 33 credits
[19121.335753] ath9k_htc 1-1.4.3:1.0: ath9k_htc: FW Version: 1.3
[19121.335758] ath: EEPROM regdomain: 0x809c
[19121.335759] ath: EEPROM indicates we should expect a country code
[19121.335761] ath: doing EEPROM country->regdmn map search
[19121.335763] ath: country maps to regdmn code: 0x52
[19121.335765] ath: Country alpha2 being used: CN
[19121.335766] ath: Regpair used: 0x52
[19121.335769] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[19121.335772] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335774] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[19121.335777] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335779] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[19121.335781] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335783] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[19121.335785] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335787] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[19121.335789] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335791] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[19121.335793] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335795] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[19121.335798] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335799] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[19121.335802] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335804] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[19121.335806] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335808] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[19121.335810] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335812] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[19121.335814] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.335816] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[19121.335818] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[19121.335820] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[19121.335897] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[19121.335899] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335902] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[19121.335904] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335906] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[19121.335908] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335910] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[19121.335912] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335914] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[19121.335917] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335919] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[19121.335921] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335923] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[19121.335925] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335927] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[19121.335929] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335931] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[19121.335934] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335936] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[19121.335938] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335940] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[19121.335942] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19121.335944] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[19121.335946] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19121.335948] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[19121.335951] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19121.335953] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[19121.335955] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19121.336674] ieee80211 phy2: Atheros AR9271 Rev:1
[19121.336722] cfg80211: Calling CRDA for country: CN
[19121.337685] Registered led device: ath9k_htc-phy2
[19121.343122] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[19121.343158] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343163] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[19121.343167] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343170] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[19121.343174] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343177] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[19121.343181] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343184] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[19121.343188] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343194] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[19121.343206] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343217] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[19121.343223] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343226] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[19121.343230] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343233] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[19121.343235] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343238] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[19121.343241] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343257] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[19121.343261] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343265] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[19121.343269] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343272] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[19121.343276] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[19121.343279] cfg80211: Disabling freq 2484 MHz
[19121.343284] cfg80211: Regulatory domain changed to country: CN
[19121.343287] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19121.343291] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[19121.343294] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)

[Tota]

Ola

[19119.511163] dib0700: firmware started successfully.

Pelo que indica o dmesg seu pen sdbtv está funcional.

Para pegar os canais você deveria refazer o scan, com a antena bem posicionada ou com antena externa (não sei onde você está nem se tem canais em hdtv aí em seu local)

Pelo que já postou anteriormente nenhum canal foi detectado, então refaça com a antena em outro ponto.

[_]'s

[Bignildo]

Ola Tota, estou em Fortaleza/CE, e aqui em casa com a antena externa pega os canais hdtv, mas no windows 7. Só que atualmente no proprio windows, os canais estão que falhando. Deve ser mesmo o problema na antena externa. Vou providenciar outra com maior alcance.

Meu caro, muito obrigado pela paciência e ajuda.

Assim que resolver o lance da antena, posto aqui o resultado.

Abraço!

[Tota]

Disponha sempre.

Volte a postar seus resultados

[Bignildo]

Ola Tota, e amigos do ubuntu!

Demorei mais voltei. Bom, Tota, realmente o problema estava sendo a antena. Comprei uma externa.

Seguir este tutorial abaixo descriminado, o qual encontrei no site: http://www.vivaolinux.com.br/dica/Placa-de-TV-Digital-no-Ubuntu-1204

Fiz tudo do tutorial e conseguir encontrar os canais, no meu caso todos que tem na minha cidade. (1 seg e Full seg).


Instalação

Instalando driver e aplicativos para TV digital no Ubuntu 12.04.

1. Execute os comandos no seu terminal:

# git clone git://linuxtv.org/media_build.git
# cd media_build/
# ./build
# make install

Obs.: Os passos acima foram como usuário root.

2. Instalando firmware:

Não precisa baixar o firmware atualizado, ele já é instalado quando plugamos o periférico na saída USB. Só temos que ativá-lo clicando em:

Aplicativos > Ferramentas do sistema > Configuração do sistema > Drivers adicionais > Firmware para cartões USB > Ativar

A luz ficará verde, se tudo estiver funcionando perfeitamente.

3. Baixando ferramentas:

Como root:

# apt-get install dvb-apps

Configuração
1. Crie o arquivo ch_freq.conf, que irá conter a frequência dos canais.

$ nano ch_freq.conf

Cole o conteúdo:
 # UHF channels 14 to 69
T 473142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 14
T 479142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 15
T 485142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 16
T 491142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 17
T 497142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 18
T 503142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 19
T 509142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 20
T 515142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 21
T 521142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 22
T 527142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 23
T 533142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 24
T 539142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 25
T 545142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 26
T 551142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 27
T 557142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 28
T 563142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 29
T 569142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 30
T 575142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 31
T 581142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 32
T 587142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 33
T 593142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 34
T 599142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 35
T 605142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 36
# channel 37 not used
T 617142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 38
T 623142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 39
T 629142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 40
T 635142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 41
T 641142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 42
T 647142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 43
T 653142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 44
T 659142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 45
T 665142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 46
T 671142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 47
T 677142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 48
T 683142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 49
T 689142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 50
T 695142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 51
T 701142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 52
T 707142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 53
T 713142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 54
T 719142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 55
T 725142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 56
T 731142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 57
T 737142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 58
T 743142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 59
T 749142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 60
T 755142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 61
T 761142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 62
T 767142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 63
T 773142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 64
T 779142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 65
T 785142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 66
T 791142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 67
T 797142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 68
T 803142857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # channel 69

2. Faça um scan para verificar quais canais estão disponíveis em sua área:

$ scan ch_freq.conf > channels.conf

Obs.: O arquivo channels.conf irá armazenar os canais encontrados.

Instalando/Configurando o player VLC
$ sudo apt-get update
$ sudo apt-get install vlc vlc-plugin-pulse mozilla-plugin-vlc libavcodec-extra-52

Depois de instalado, e só abrir o VLC no menu:

Aplicativos > Multimídia > Reprodutor de mídias VLC

Basta clicar em: Mídia > Abrir arquivo

Na tela que se abrir, escolher o arquivo: channels.conf

Ele abre geralmente no primeiro canal da lista, senão, é só clicar no arquivo "channels.conf" com o botão direito do mouse, e escolher: Reproduzir

Espero ter ajudado. Um abraço ao dougsland.

E se alguém precisar de mais ajuda: weltonvaz[at]yahoo.com.br

Fontes

    http://dougsland.livejournal.com/103169.html
    http://www.videolan.org/vlc/download-ubuntu.html
    How to Obtain, Build and Install V4L-DVB Device Drivers « http://www.linuxtv.org/wiki